A while back DanO and I painted our kitchen table with chalkboard paint. I had exactly zero desire to make it a DIY blog post, in fact I haven’t even mentioned it here at all, but I have put pictures out on twitter and instagram intermittently which brought a fair amount of curiosity. I promise I have no intention of going on a “here’s ANOTHER thing you can slap chalkboard paint on!” kick, but I do want to answer some questions about our experience.
First of all, the what and the why:
We have the Ikea Liatorp pedestal table in our breakfast nook. We purchased it from the as-is section of Ikea. Have you been there? Super awesome prices on returned and floor/display model furniture and items. An example of the kind of awesome scores you can find there, a few years ago we got our china hutch from the as-is section. It was the floor model and the doors didn’t open very well, so it was 50% off. We thought “Whatev, how often do you open a china hutch anyway? Totally worth $150 savings.” It was assembled, so we had to disassemble it to fit it in our pint-sized SUV (Ah, life pre-mini-van). As DanO was standing on the sidewalk outside Ikea doing his thing with an alan wrench, we realized that the door hardware was installed backwards, making the doors operate poorly. Now it works perfectly but it was still 40% off. BAM. Ikea as-is section.
Our kitchen table came to us by way of a couple of scratches in the top which was, again, worth it in light of the cost savings. But as time went on and I popped out a couple of boys, severed up a couple of hundred hot dishes (AKA casseroles to the non-Minnesota world) and O, I dunno maybe didn’t treat the table very gently…
…the dents and scratches had little dent and scratch babies. We decided to do something about it, and that something turned out to be paint the top with chalkboard paint.
First thing we did was pick out the type of paint we wanted. After reading several reviews (cough Pinterest cough) on brands, types, etc. we decided to go with Rust-Oleum Specialty Latex ChalkBoard paint which I found at our local hardware store.
From there, we basically followed the directions on the paint can. (See? This is why I’m not a good DIY blogger. I just blogged myself out of a job. Surprise! The “tutorial” is on the can!)
Because he is an overachiever and because we have a sanding attachment for our drill, DanO sanded down the tabletop like this:
But sanding by hand would definitely do the trick as well. For the first round of sanding, he used a lower grit paper for a more “rough sand” which he then followed up with a finer grit for a smoother sand. The objective here is to “score” the previously smooth surface so that the paint will adhere better.
One thing we learned through this process is that some of the circular sanded patterns will show through the paint. This is ok, and I don’t think anyone but us would notice it since we know they’re there and are our own worst critics, but to minimize that, I would recommend sanding as evenly as possible. In some places, the composite wood beneath the white laminate coating showed through and kind of made me panic, but it turned out fine.
Because our table expands, we pulled out the insert and set it in place making sure to leave space so that we would get paint all the way to the edges of all parts. At first we thought we would use a foam roller to apply the paint, but it didn’t seem to leave a thick enough layer, so we switched to a brush. This means that if you look closely you can see brush marks, but I think this is only bothersome to my (bless his heart) perfectionist husband.
The can suggested an 8 hour wait time between coats (of which we did two) and a four (painfully long) day wait before coloring on the surface. For that time, we didn’t tell the boys what the paint was, but OBoy noticed that we painted the table black. Imagine his surprise when we told him he could draw on the furniture!
Once it can be drawn on, the instructions say to prime the surface by rubbing chalk on All Of The Things. It also says to do this anytime the surface is washed off. We did it that first time like good little instruction followers, but we have not done it a single time since. It’s a kitchen table. I am spraying and wiping it down at least 2 times a day and there’s no realistic way that I would scrub, wipe, and then take a few moments to slather with chalk. Nuh uh. Nogunna happen. I think the directions say to do this for future ease and erasability, but since I am using water or a surface cleaner every time I “erase” it, I have not noticed an issue in the least.
One of the main concerns I had about having a chalkboard table was the amount of chalk dust I would be managing. Being completely honest, it has not been a problem. Again, I use water or surface cleaner on a regular basis, so I think most of it comes off that way. Once or twice the boys have dragged themselves and their clothes over a chalk-covered surface and come away with chalk-covered sleeves, but one of the beautiful things about chalk is the ease of removal. It’s way tougher to get “washable” marker off of a toddler than chalk dust. Pat, pat, wipe, wipe, and we’re done.
I have truly loved finding different ways to use the table as part of our family life. Birthdays, holidays, fun phrases and miscellaneous celebrations have been featured on the table. Several times I have written Bible verses as reminders of what we learned about in church that week or just what’s on my heart. DanO has been known to write me (and the boys) love notes via the table, and it made for a fun buffet set up at a party I threw in the fall, where tented food labels were replaced with chalk doodles.
The one word to the wise I have is that it is not as durable as I would have hoped. To be fair, we have two children under four years old and we are not perhaps your average furniture users, but when the one and a half year old went all drummer with his fork after dinner one evening, it left marks. (cue: sad trombone) At this rate, I think we will probably do another coat over the top within a year. So, not great durability, but I would definitely do it again all considered.
If you have any questions I haven’t answered here, feel free to ask! I’m an open book.
And happy New Year!